Contrast and sensitivity of the vibration fringes in time-averaged electronic speckle-pattern interferometry: effect of variations of force level

The time averaged frame subtraction technique is improved by subtracting two Bessel fringe patterns at two different force levels. The technique enables significant enhancement of fringe contrast and increased measurement sensitivity. The contrast and sensitivity of the fringes obtained at different force ratios are investigated. Both theoretical and experimental results are presented.     

Low-frequency harmonic vibration analysis with temporal speckle pattern interferometry

In this paper, the time sequence phase method (TSPM) has been applied to measure the displacement caused by low-frequency vibration in temporal speckle pattern interferometry (TSPI). The principle is that by capturing the temporal speckle patterns related to the object vibration, the whole-field displacement responses (amplitude and phase) of the vibrating object can be calculated through scanning these fluctuations. Thus, quantitative measurement can be carried out using a conventional ESPI system without a camera synchronized to the object vibration or a phase shifting system. The elaboration on the method is given and experimental results are presented.     

孔径旋转频闪散斑照相法测量物体的固有频率

提出了一种测量物体固有频率的新方法－－孔径旋转频闪散斑照相法。该方法能方便地测量振动物体的固有频率，具有精度高、全场显示、条纹可见度好等优点，给出了理论分析和实验结果。     

A study on spatially extended phase objects using speckle photography

We present an application of an improved speckle photography technique for spatially extended phase objects. A contour mapping of a thin lens displaying its phase variation is presented. A theoretical analysis is investigated followed by the experimental presentation. Reasonable interference fringes are obtained and compared with the fringes obtained for hot air. The phase information of the object is extracted using the point-by-point technique.     

A new method for generating and analysing digital speckle shearing correlation fringe patterns

A method for generating a high visibility digital speckle shearing fringe pattern is proposed. A three-step phase shifting technique which involves the introduction of arbitrary phases is utilized. The phase shifting technique is carried out using a rotating mirror and a theoretical model which involves a linear correlation algorithm is discussed. Experimental results showing correlation fringe patterns and a deformation phase map are presented.     

相移测量技术中相移器研究

本文介绍一种用于相移测量技术的相移器。该相移器由计算机通过Ｄ／Ａ接口板自动控制输出电压幅度，其电路采用闭环控制，位移由压电晶体产生，具有很高的电压稳定度（０１％）和较小的相移误差（小于３°）。描述相移器的结构、驱动源工作原理及相移器标定方法     

锁相电子散斑系统

电子散斑干涉计量在变形量检测¹、无损探伤、振动分析^(2,3)等领域具有广泛的应用前景,目前它之所以未能实用化,最重要的原因就是该系统对环境的要求过高,特别是物体的振动和空气的扰动对测量结果影响很大,甚至会导致测量失败,因而国内外学者在不断寻找解决此问题的锁相技术。本文提出了一种简易的切实可行的锁相方法-光学锁相法,消除了物体的振动和空气扰动对电子散斑测量的影响。     

离焦散斑技术研究Kirchhoff板在动载作用期的弯曲

本文使用动态离焦散斑技术,测试板的动态弯曲获得成功。并推导了Kirchhoff板动态变形的有关分析,提出了由最大斜率确定材料常数的思想。显然,这是同离焦散斑方法所测数据直接相关的处理手法。     

可调实时时间差电子错位散斑技术及应用

本文首次提出一种可调实时时间差电子错位散斑干涉技术,并成功地用于热变形测量,该方法还可用于长时间连续变形和瞬态大变形的位移测量。叙述了该技术的原理,给出了一些应用的实验结果。     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.